Skirt board conveyor belt rubber skirting board
We are a factory producing conveyor skirt board, dual seal skirt board, polyurethane skirt board, rubber skirt board, etc
About Us:
1. Factory producing conveyor skirt board for over 20 years
2. Advanced production line and testing machine
3. Reliable factory, proven quality, resonable price
4. ISO9001:2015, 14001:2015, 45001:2018
Conveyor Skirt Board
Conveyor skirt boards are an essential part of your conveyor belt system. Conveyor skirt boards hold material on conveyor belts and prevent excessive spillage.
Technical Data Sheet for Rubber Skirt Board
| 60A Shore Rubber Skirt Board |
| Tensile Strength |
≥18 MPa |
| Elongation At Break |
≥650% |
| Abrasion Loss |
≤110 mm3 |
| Rubber Hardness |
60~65 Shore A |
| 40 Shore A Rubber Skirt Board |
| Tensile Strength |
≥25 MPa |
| Elongation At Break |
≥ 860% |
| Abrasion Loss, dry |
≤ 230mm3 |
| Abrasion Loss, wet |
≤ 15 mm3 |
| Rubber Hardness |
38+/-5 Shore A |
Polyurethane Skirt Board
Conveyor belt polyurethane skirting is newly developed conveyor skirt board, PU skirt board exhibits excellent wear resistance than rubber skirting. Thickness, width and bevel edge of polyurethane skirts can be produced upon requests.
Roll length can be 15m or 30m, or longer, as your requests
Features of conveyor belt PU skirt
1. Much better wear resistance than rubber
2. Various sizes are available
3. Roll length: 15m roll or 30m roll
4. Thickness: 6mm, 8mm, 10mm, 12mm, 16mm, 20mm, etc
About Polyurethane:
Polyurethane is a unique engineering material which offers the elasticity of rubber, toughness and durability of metal.
Polyurethane elastomers are extremely versatile materials and this has been the key to their widespread applications. This flexible engineering material is available in polyurethane sheet, rod, tube, and custom cast products.
Casting polyurethane products we produced
Y Type Dual Seal Skirt Board
Dual seal skirting board is a low maintenance design that provides an effective seal without the application of downward force onto the belt. It is recommended that appropriate wear liners be installed on the inside of the chute to protect the sealing system from material side-loading forces. It is composed of a single strip of rubber fabricated with an integral "outrigger" strip to form two sealing barriers. This skirting will provide dual sealing effectiveness while allowing the simple installation of single-strip systems. The sealing strip is clamped against the metal chute wall above the belt. The strip's primary leg is installed to touch the belt, forming a flexible wall to contain fugitive material. The sealing strip's "outrigger" leg will be installed so it lies on the outside of the belt, away from the mateiral load.
Polyurethane Y Type Skirt Board
Audited Supplier 
){kind=link}
){kind=link}