High Quality Conveyor Drive Pulley Rubber Ceramic Lining
Why Choose Us:
1. Pulley rubber ceramic lining factory.
2. Over 20-year experience.
3. Proven quality.
4. ISO9001, 14001, 45001 factory.
Rubber-ceramic lining for conveyor drive pulley.
1. Description of rubber-ceramic lining:
Rubber-ceramic lining for pulley is vulcanizing 20x20x8mm or 20x20x6mm alumina ceramic tiles into rubber matrix. Rubber-ceramic lining can improve the friction coefficient between pulley and belt, reducing belt grip.
Rubber-ceramic lining in 10m roll, 10m long rubber ceramic lining for pulley.
There will be normal or unexpected wear or aging issues after a long term operation, and such issues may cause accidents which will affect the normal operation of conveyor system.
Pulley lagging can increase the coefficient friction, reduce wear to the pulley and belt, and offer proper grip to belt. Pulley lagging helps to extend service life of pulley and belt. It can also improve the operation and avoid belt slippage significantly.
15mm thick rubber-ceramic lining for conveyor pulleys.
The pulley lagging sheets with a CN bonding layer are bonded to pulley by cold-bond adhesive. Cold-bond pulley lagging sheets have the following advantages compared with traditional hot lagging: higher vulcanizing pressure, lower sulfur, higher density, good elasticity, etc., so cold-bond lagging exhibits good wear resistance and anti-sticky property, higher tensile strength and elongation. Cold-bond pulley lagging has good aging-resistance so that its service life is several times higher than hot lagging. Diamond patterns increase the friction of coefficient and grip, improving the belt operation.
Available thickness: 8mm, 10mm, 12mm, 15mm, 20mm, etc.
Ceramic lagging sheets comprise of high alumina tiles, rubber matrix and a CN layer, which ensures fast and high bonding strength.
Cn layer backed rubber ceramic lining, CN bonding layer helps provide fast bonding.
Conveyor pulley rubber lagging and rubber ceramic lagging.
2. Features of rubber pulley lagging:
1>Reduce conveyor belt slippage
2>Extend conveyor belt and conveyor pulley life
3>Available in natural rubber and fras approved rubber
4>With cn adhesive layer, semi vulcanized chloroprene rubber, make sure high adhesion between rubber and pulley
Physical Properties:
Elastomer: NR / SBR blend
Hardness: 60-65 Shore A or as request
Tensile strength: 15 MPa
Elongation at break: >450%
Abrasion loss: 90mm3
Overall thickness:8mm,10mm,12mm,15mm,20mm,etc
Width: 800mm, 1000mm, 1200mm, 1400mm, 1600mm, 1800mm, 2000mm, etc.
Length:10m, 20m, 30m, etc
Production Line for Pulley Lagging Rubber Sheet
More information, just contact us.
Audited Supplier 
){kind=link}
){kind=link}