Conveyor Pulley Lagging Material Ceramic Rubber Pulley Lagging
Pulley lagging rubber backed ceramic sheet.
Conveyor pulley lagging rubber sheet.
Pulley Lagging:
Pulley lagging is used to increase the friction of coefficient between pulley and belt, reduce conveyor belt slippate and mistracking.
Types of pulley lagging:
1. Diamond rubber lagging
2. Plain rubber lagging
3. Rubber ceramic lagging
4. Weld on pulley lagging, also called replaceable pulley lagging, pulley lagging with metal retainer
5. Bolt-on pulley lagging
Bolt on rubber ceramic lagging.
Cold bond diamond rubber lagging
Conveyor pulley ceramic lagging
Conveyor drive pulley ceramic lagging
Ceramic Pulley Lagging is specially suited for pulleys where slippage and excessive wear and tear problems make normal rubber lagging ineffective. The high alumina ceramic tiles with nibbles deliver excellent wear resistance.
Cn bonding layer of ceramic lagging ensures fast and higher bonding strength to surface of conveyor pulley.
Technical data for
ceramic lagging:
1. High-wearable Al2O3 ceramic tiles, into special rubber. With the specification 20mm× 20mm
2. Aluminum Oxide content: ≥ 92 %.
3. Bonding CN Layer
4. Ceramic Hardness: Mohs hardness 9
5. Working temperature: ≤ 85 ° C
6. Rubber Hardness: 60± 5 Shore A
7. Tensile strength: 150Kg/m²
8. Ceramic surface shape: Plane, convexity
9. To suit for pulleys performing in the most difficult conditions.
10. To install through cold bonding on the jobsite.
About US:
We are a factory producing pulley lagging material, conveyor skirt board, conveyor belt cleaner and other conveyor parts.
Audited Supplier 
){kind=link}
){kind=link}